Product
Just make durable grinding media
Product Center
Product Model
Product Features
Application Industry
Higher toughness than alumina beads:break resistance;
Lower surface friction coefficient and hardness:lower wear and tear to the internal parts of bead mills;
Low wear rate of beads:increase whiteness and coloury of slurries.
Matching mills:lower intensity mills.
Minerals industry;
Chemical industries;
Fillers:filler of paper,plastic and rubber.
Economic cost is possible to charge huge quantity of beads;
High hardness is suitable to grinding abrasive material;
Matching mills:big capacity ball mills.
Non-metallic mineral industry:Kaolin,quartz and kaolinite,etc.
Metal minerals:copperlead/zinc and silver minerals;
Low sliding friction coefficient results in high energy efficiency,lower wear of contacted parts of mills;
Consistent microstructure benefit low bead consumption;
High sphericity and roundness to improve the fluidity;
Matching mills:big volume stirred mill with discs.
Metallic minerals industry:copper concentrate,lead/zinc,silver,and gold mine.
Pesticide and paints industries;
Non-metallic minerals:ZrSiO₄,Kaolin,CaCO₃and SiO₂.
Tight and homogenous microstructure of zirconium silicate;
Glazed working surface;
Excellent performance cost;
Matching mills:discs type of horizontal or vertical bead mills;pin type with the tip speed less 12m/s.
Pigments and dyestuffs:to grind and disperse inorganic pigment such as TiO₂,carbon black;organic pigments such as phthalocyanine blue,cromophtal yellow;
Coatings &paints:protection paint,emulsion paint, printing inks,inkjet inks,paper coating and video tape coating;
Fillers:Zircon sand Kaolin,Mica,CaCO₃and steatite.
Agricultural chemicals:Pesticides,herbicides,fungicides, seed coatings and micronutrients,etc.
Middle density: reduce the bead filling amount.
Middle hardness: can handle most materials.
Multi-size optional: for ball grinding and bead grinding.
Non-metallic minerals: calcium carbonate, kaolin, barium sulfate, barium titanate and clay.Pigments: Disperse pigments, dyes and glazes.
Chemical industry: coating, pesticide suspension concentrate and fertilizer, etc.
Middle and high density: >4.4kg/dm³; Middle and high hardness: >1150kg/mm²;Multi-size optional: >1mm, <12mm
Non-metallic minerals: calcium carbonate, kaolin, mica and zircon sand.Metal mines: magnetite, manganese, lead & zinc, copper and gold mine.
The specific gravity and hardness are closed the Y-TZP beads;
Higher wear rate than Y-TZP, but lower unit cost;
A little Can handling abrasive concentrates and high viscosity slurries;
Matching mills: general stirred mills with disc, turbine and pins.
Inks: printing inks such as gravure inks, screen inks and offset inks; inkjet inks, UV inks and water-based inks;
Coating and paints: prime and top coating of auto, coiling coating, paper coating, emulsion paint and marine paint;
Pigments: TiO₂, CaCO₃ and ceramic glazing.
Lithium battery: Separator material.
A wide range sizes for selection: from micro bead 0.03mm to big ball 60mm;
Fine and homogenous Tetragonal Zirconia Policristal (TZP): PPM wear rate suits to deal with contamination free products;
The highest hardness and toughness: the optimal choice to grind the corrosive and abrasive material;
Matching mills: micro beads for nano bead mills; middle size beads for high intensity mills and big ball for stirred or rolling ball mills.
Ceramic pastes or powder: ceramic pastes such as aluminum oxide, zirconium silicate and zirconium oxide;
Electronic pastes: noble metal pastes such as gold, platinum, palladium and silver; base metal pastes such as cuprum, nickel and zinc pastes;
Nano material: pigments of inkjet like carbon black and magenta; pigments of LCD, color filter, diamond for polishing agent, TiO₂ for photo catalyst.
Battery materials: lithium manganate, lithium titanate and lithium iron phosphate cathode materials; Graphite, silicon metal and other anode materials; Diaphragm materials and conductive liquid, etc;
The signature bright black color is not only suitable for the grinding of dark materials, due to the low ware rate of PPM level, but also suitable for the ultra-fine and pure Dispersion and grinding of light materials.
Carbon materials: carbon black, graphite, graphene and carbon nanotubes.
Inkjet inks: office ink, UV ink, glass ink, ceramic ink and textile ink.
Printing inks: flexo ink, gravure inks, magnetic ink and conductive ink.
Coating : ship paint , bullet train coating , automobile coating and aviation coating.
Pesticide: herbicides, insecticides, fungicides and microfertilizers.
Highest specific gravity: improve grinding efficiency and decrease beads floating;
Uniform glazed spherical surface on duty: save grinding energy, avoid wear and tear of beads and internal parts of mill.
Matching mills: high intensive energy horizontal mills and slim vertical mills.
Pigments: metallic pigment, dark color organic pigments;
High viscous pastes: offset printing ink, adhesive and ceramic slurries;
White filler and coatings: titanium dioxide, Ground Calcium Carbonate (GCC) and Kaolin;
Metal minerails: gold, platinum, silver and lead/zinc.
Phone:
Email:
Add.: 1, Huitong Block, Butterfly Ridge Ind. Zone, Heyuan
517500, China
Leave Message
If you have any queries about us or our product(s), feel free to drop us a message.